Meaisín Táthú Aer Te Plaisteacha Sochorraithe Auto Do Theach Phuball Inséidte

Meaisín Táthú Aer Te Plaisteacha Sochorraithe Auto Do Theach Phuball Inséidte

Video link:https://youtu.be/x81S-n4GTZ8
Introduction of AUTO Movable Plastic Hot Air Welding Machine :
Tá buntáiste uathúil ag Meaisín Táthú Aeir Te Plaisteacha Sochorraithe Auto chun táirgí inséidte a tháirgeadh, atá difriúil go hiomlán le teicneolaíocht táthú ardmhinicíochta agus táthú leá te, Séidtear an t-aer te idir an dromchla séalaithe, faoi ​​bhrú oiriúnach riachtanach chun éifeacht táthú foirfe a fháil, PVC, Tá ábhar TPU ar fáil go léir, a dhéantar go teach tent,struchtúr scannán ,tarpaulin,PVC,TPU,Corpoideachas srl.

Welding material of AUTO Movable Plastic Hot Air Welding Machine:
1.Vinyl (PVC) fabraic lannaithe
2.Fabraicí brataithe vinile
3.Scannáin vinil
4.Scannán polúireatán
5.Fabraic brataithe polapróipiléine
6.poileitiléin (Corpoideachas)
7.Rubar teirmeaplaisteach (TPR) scannán
8.Fabraicí rubair teirmeaplaisteacha
9.poileistir neamhfhite
10.téipeanna comhleá éagsúla
11.Táirgí easbhrúite dochta

Features of AUTO Movable Plastic Hot Air Welding Machine:
1.Computerized,most intelligent type,can move and located automatically.
2.Auto temperature control with high stability,max temperature alarm design to protect heater.
3.Original imported computer chip design , can be programmed in accordance wit user’s requirements,microcomputer automatic control the whole machine ,oibriú simplí , stable performance action, ráta teip íseal .
4.It is 3 inch Panasonic touch screen and can directly show all kinds of data.
5.Temperature is automatic tracking controlled by computer and its precision can reach +/-1.
6.The temperature is controlled by computer chip.two speeds motor.separate upper and lower roller motor , can adjust its speed .
7.Turn on the heating button , later turn it off and then delay the shut down , get into count down
8.No table, wide lower prop design ,suit to processing the large tents, báid rubair , air balloon, táirgí fuála gan uaim, srl.

Technical parameters of AUTO Movable Plastic Hot Air Welding Machine:
Voltas
AC220V 50HZ
Rialú teasa(aer te)
Suas go dtí 700 ° C
Cumhacht
4000W
An gunna istigh
24/27mm
Rialú teasa(ding te)
Up to 450°C
Luas
1-15m/nóim
Meáchan Glan
245KG
Brú
0.35-0.5Mpa
Optinal Function
Wedge te
Toise
1500*760*1600mm
Roller Width
20-50MM
Nozzle Width
20-50MM