AUTO Movable Plastic Hot Air Welding Machine For Inflatables Tent House

AUTO Movable Plastic Hot Air Welding Machine For Inflatables Tent House

Video link:https://youtu.be/x81S-n4GTZ8
Introduction of AUTO Movable Plastic Hot Air Welding Machine :
AUTO Movable Plastic Hot Air Welding Machine has unique advantage in producing inflatable products, which is total different with high frequency welding and hot melt welding technology, the hot air is blew between the sealing surface, under necessary suitable pressure to get perfect welding effect, PVC, TPU material are all available, which are made to tent house,film structure ,tarpaulin,PVC,TPU,PE etc.

Welding material of AUTO Movable Plastic Hot Air Welding Machine:
1.Vinyl (PVC) laminated fabric
2.Vinyl coated fabrics
3.Vinyl Films
4.Polyurethane film
5.Polypropylene coated fabric
6.Polyethylene (PE)
7.Thermoplastic rubber (TPR) film
8.Thermoplastic rubber fabrics
9.Non woven polyester
10.Various fusing tapes
11.Rigid extruded products

Features of AUTO Movable Plastic Hot Air Welding Machine:
1.Computerized,most intelligent type,can move and located automatically.
2.Auto temperature control with high stability,max temperature alarm design to protect heater.
3.Original imported computer chip design , can be programmed in accordance wit user’s requirements,microcomputer automatic control the whole machine ,simple operation , stable performance action, low failure rate .
4.It is 3 inch Panasonic touch screen and can directly show all kinds of data.
5.Temperature is automatic tracking controlled by computer and its precision can reach +/-1.
6.The temperature is controlled by computer chip.two speeds motor.separate upper and lower roller motor , can adjust its speed .
7.Turn on the heating button , later turn it off and then delay the shut down , get into count down
8.No table, wide lower prop design ,suit to processing the large tents, rubber boats , air balloon, seamless sewing products, etc.

Technical parameters of AUTO Movable Plastic Hot Air Welding Machine:
Voltage
AC220V 50HZ
Heat control(hot air)
Up to 700°C
Power
4000W
The gun inner
24/27mm
Heat control(hot wedge)
Up to 450°C
Speed
1-15m/min
Net weight
245kg
Pressure
0.35-0.5Mpa
Optinal Function
Hot Wedge
Dimension
1500*760*1600mm
Roller Width
20-50MM
Nozzle Width
20-50MM